Autoclaves generally take a long time to process the products in the tank, and the value of the products is high. If we can improve the production efficiency or even the very low efficiency, it can also be greatly improved. Today, I will introduce some methods to improve the efficiency of autoclaves. I hope you can improve your production efficiency and bring you higher profits.
       1. improve the temperature balance. The heat exchange capacity of the autoclave pipe diameter does not match, which will affect the heat exchange rate of the autoclave. We can improve the temperature of the water tank through relevant improvements, which is conducive to air circulation. The temperature is also more uniform.
       2. the production status changes, and the temperature rise is related to the product specification, the number of autoclaves and the number of autoclaves using superheated water at the same time. With the change of superheated water volume, the system pressure difference and flow rate are different, resulting in the change of heat exchange time from different heat transfer rates.
Relevant improvement measures: for the problem of insufficient heat in the pipe network, the secondary return water will be two systems, and an automatic regulating valve will be added to the return pipe to rebuild the hot pressing pipe network before and after the transformation. Secondly, increase the circulation volume in the tank, adjust the temperature collection point, and stabilize the heating temperature.
       3. when the autoclave is produced, the heat cannot be combined because there is residual air in the water tank. We can discharge the material and then heat it up during the production process so that it will not enter the oil tank. There is residual air in the air.